FUJITSU ScanSnap Color Image Scanner S510M - Manual (Page 45)

3.1 Flow of Operations
ScanSnap S510M Operator's Guide 29
Basic Scanner Operations
3
■ End of Operation
Exiting "ScanSnap Manager"
Operation
Click and hold the mouse button on the "ScanSnap Manager" icon in the Dock menu, and
select "Quit" from the menu.
Disconnecting the scanner
Operation
1. Close the paper chute to turn off the scanner.
⇒
The "ScanSnap Manager" icon changes to . The Power lamp goes out.
2. Unplug the USB cable from your computer.
3. Unplug the AC cable from the power outlet.
HINT
To operate ScanSnap, "ScanSnap Manager" must be active (stay resident).
When you want to resurrect "ScanSnap Manager," select the destination where
ScanSnap is installed (generally, "Applications" - "ScanSnap") from Finder,
and then select "ScanSnap Manager."
(*You do not have to quit "ScanSnap Manager" under normal conditions.)
HINT
The scanner is turned on/off in conjunction with the computer or
by opening/closing the paper chute. Therefore, you do not have to press the
[SCAN] button to turn on/off the scanner while it is connected to your computer.