3 replacing pick roller, Replacing pick roller -5, Pick roller replacement -5 – FUJITSU M3096EX/GX User Manual

Page 42

5 – 5

③

Insert the pad assembly into the ADF frame hole (the bigger one),
slide the assembly to the direction of the arrow until it clicks.

ADF frame

Pad assy

NOTICE : Set the paper select lever to "N", before removing pad ASY

(See Section 4.3).

NOTICE : Pad can be replaced by aligning the holes of the pad with

the pins of the pad holder.

Pick spring

Pad

Pad holder

5.4.3

Replacing pick roller

Replace the pickroller as follows.

(a) Pull the cap up to open the ADF

unit.

(b) Remove two thumb screws shown

in Figure 5.4. And remove the
Guide A.

Figure 5.4

Pick Roller replacement

Guide A

Thumb Screw

Cap