FUJITSU M3096EX/GX - Manual (Page 16)

2 – 7
The ADF, size, density, resolution, landscape, half-tone, document,
and mode 1 and 2 buttons described below are effective unless other-
wise specified by the host system.
Automatic document feeder (ADF) button:
Selects whether to feed documents automatically by ADF or
manually on the flatbed. When this button is pressed, the lower
line is displayed as shown in Screen 1. Each time this button is
pressed, “FB” or “ADF” starts blinking in turn, and the read
operation status displayed in the upper line changes accord-
ingly.
Screen 1 — The upper line shows a typical example.
Blinking
Upper line
Lower line
A F D A
e R B F : d a
0 0 4
F D A
> . L 4
Size button:
Selects a document size. When this button is pressed, the lower
line is displayed as shown in Screen 2. Each time this button is
pressed, “DLT”, “LT”, “LG”, “A3”, or “A4” starts blinking in
turn, and the size displayed on the upper line changes accord-
ingly.
Screen 2 — The upper line shows a typical example.
Upper line
Lower line
L F D A
: e z i S L L G
0 0 4
T L 4 A 3 A
> . L G
T D
Blinking
If the direction indicated on the upper line is “ ”, only “LT”
or “A4” can be selected.