FUJITSU M Server M5000 - Manual (Page 19)

Capacity on Demand (COD) Administration 7
Note – This manual is written based on the XCP 1093 firmware or later. When using
the XCP 1092 or earlier, see the following table and confirm the corresponding
commands.
For details about the commands, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual or manual pages.
TABLE 2 COD-related Commands
Features XCP 1092 or Earlier XCP 1093 or Later
Adding a key addcodlicense (8) addcodlicense (8) or
addcodactivation (8) *
* Both commands can be used in the same way.
Deleting a key deletecodlicense (8) deletecodlicense (8) or
deletecodactivation (8) *
Displaying key
information showcodlicense (8) showcodlicense (8) or
showcodactivation (8) *
Setting resources setcod (8) †
† The command output varies depending on the firmware version. For details, see the manual pages.
Displaying COD
information showcod (8) †
Displaying COD
resource usage showcodusage (8) †
Displaying log of key
addition/deletion showcodactivationhistory (8) ‡
‡ The command is supported in XCP1101 or later.