Fluke DDS Function Generator 271 - Manual (Page 17)

Getting Started
Controls and Connections
MODE Keys
Alternate presses of a MODE key will turn the mode
(TRIG, GATE, AM, etc.) on or off, and when the function is
on the associated lamp is lit.
If you press the EDIT key then press a MODE key you will
see the edit menu for that mode. The associated lamp
flashes when the edit menu is displayed.
Some of the modes share
keys with the numeric
keypad. For example, to
see the edit screens for
HOP
mode, press EDIT
then the numeric 5 key.
To return to the main menu
from any edit menu, press
the ESCAPE key.
shx0010f.gif
UTILITIES Keys
The UTILITIES keys give
access to the STORE,
RECALL
and REMOTE
edit menus. The instrument
can store up to nine set-ups
(numbered 1 to 9), and can
recall any of those plus
set-up 0 which is the factory
default set-up and is not
editable.
shx0011f.gif
The MAN/SYNC key is used for manual triggering and
synchronizing two or more generators when suitably
connected together. Further information on synchronizing
two generators is given in the Users Manual.
OUTPUT Key
The OUTPUT key turns the
MAIN OUT
on and off.
When the output is on the
LED next to the key is lit.
The default state at power-
up is with the output off.
shx0018f.gif
7