Fluke DDS Function Generator 271 - Manual (Page 16)

271
Getting Started Manual
Numeric, Units and SET Keys
You can use these keys to
enter parameter values
directly. For example, to
set the period to 125 µs,
select the first field (FREQ),
change it to period (PER)
by pressing a DIGIT key,
then enter 1, 2, 5, us on
the keypad.
shx0009f.gif
If the numeric value is dimensionless, for example a
BURST COUNT
, the ENTER key terminates the entry;
otherwise it is terminated by the units key.
If you are editing one of the
parameters in the main
menu (frequency/period,
amplitude, dc offset or
symmetry) you can use one
of the SET keys to navigate
to the appropriate field
directly.
shx0007f.gif
The CE key clears the entry, one key press at a time.
The ESCAPE key abandons the current editing action.
In addition, if the display is of any menu other than the
main menu, the ESCAPE key will return you to the main
menu.
6