Fujitsu Siemens Computers Fujitsu-Siemens PC - Manual (Page 61)

35
i
Our tips and hints …
... on playing DVDs with WinDVD Player
With some DVD films, you may find that the picture freezes. A
possible solution to this problem is that you need to disable
"Accelerated hardware decoding".
To do this, use the following setting:
• Right click while WinDVD Player is open.
• In the subsequent menu, click on "Setup" and then on "Video".
• Deactivate:
"Use accelerated hardware decoding" (remove check mark).
• Click on "Apply" and then on "OK". This completes the
process.
... for activating/deactivating properties of optical drives (e.g.
AutoPlay function)
If it is necessary to modify the autostart (AutoPlay) function of
DVD/CD-ROM drives, you can do this as follows:
• Right click on "Start" and select "Explorer".
• Right click on the drive whose autostart function you want to
edit.
• Left click on "Properties".
• In the menu that then appears, select the "AutoPlay" tab. You
can then set an action according to the content (content type)
of the CD-ROM/DVD.
Caution!
Note that you must select the actions individually
for each "Content type" and confirm with
"Apply".
... for the use of regional codes
If your system is equipped with a DVD drive, please note that the
regional code can only be changed a maximum of five times. After