Supplement to the operating instructions – Fujitsu Siemens Computers Fujitsu-Siemens PC User Manual
Page 24

Supplement to the operating instructions
A-2
Supplement to the operating instructions
Guidelines and Environmental Protection
An important characteristic of our products, alongside quality and
performance, is environmental friendliness.
(I)
Protection of resources with energy-saving functions
Our units generally have energy-saving modes.
(II) Device
safety
The units meet the requirements of the low voltage directive
73/23/EEC including the amendment 93/68/EEC, certified in
accordance with EN 60950, and the directive on electromagnetic
compatibility 89/336/EEC including the amendment 93/68/EEC.
(III)
Guarantee of electromagnetic compatibility
All data and signal cables must be provided with sufficient
shielding. The minimum requirement is a Category 5 shielded
cable for 10/100 Ethernet, or Category 5e for Gigabit Ethernet. As
described in the operating instructions, all of the housing parts
must be installed.
− Requirements for work with monitors
Our units meet the requirements set for work with monitors in
accordance with the EU screen directive 90/270/EEC for the
purposes of the EU directive 89/391/EEC.
− Lasers
If your system has an optical drive such as a CD-ROM, CD-RW,
DVD or combined drive, the following applies:
With closed PC housings, the optical drives used correspond to
laser class 1 in accordance with IEC 60825-1. These contain light-
emitting diodes (LED) which under some circumstances may
generate a stronger light beam than laser class 1. A direct glance
into this beam, even with protective eyewear, is dangerous and
may lead to injury. Therefore, no parts of the optical drive housing
are to be removed.