Installing the removable case in the recorder, Connecting a detachable controller – Fostex D824 User Manual
Page 8
8
D824/D1624 Quick Operation Guide
Installing the removable case in the recorder
1
. Remove the blank panel that covers the slot for the disk on the front panel of the recorder.
(Note: Do not insert your
fingers into the slot when the slot cover is open. Otherwise, electrical shock or injury may occur.)
2
. Install the removable case (containing a hard disk inside) into the slot.
Push in the case with the correct side facing toward you. (Use both hands to push it in so that the surface of
the case and the front panel become flush.)
3
. Use the included key to lock the removable case.
Connecting a detachable controller
1
. Attach a detachable controller (included) to the hooks on the front panel.
2
. Securely insert the controller’s connector cable to the connector on the front panel.
Instead of using the controller, you may use an optional extension cable (Model 8551). Consult your dealer
for more information.
Model 8551 Optional extension cable
Consult the dealer you purchased the recorder from or our sales office about information on
the extension cable.
Blank panel
Removable case
Do not forget to lock the removable case installed into the slot.
When locking or unlocking the removable case with the key, make sure that the recorder's
power is off.
Lock-unlock key