Mixdown, Recording in a new program, While this recorder is stopped, press the pgm key – Fostex D824 User Manual
Page 22: Turn the jog dial clockwise to select [new program, Press the execute/yes key, Press the exit/no key, Caution, Initialize the recorder
22
D824/D1624 Quick Operation Guide
Mixdown
Initialize the recorder.
Recording in a new Program
1. While this recorder is stopped, press the PGM
key.
The display indicates [Select PGM!] momentarily, then shows
the title of Program 1. The Program number and [SURE?]
flash.
2. Turn the JOG dial clockwise to select [New
Program?].
The “?” mark of [New Program?] , and [SURE?] flash, indicating
that you can set up a new Program.
3. Press the EXECUTE/YES key.
This recorder sets up a new Program (Program 2) and enters
the [Title Edit] menu in SETUP mode, showing the following
display. In this example, we use the default title.
You can change the title later. Refer to the Reference manual
for more information.
4. Press the EXIT/NO key.
This recorder exits SETUP mode, and the top of Program 2 in
ABS Time Base (ABS 0) appears.
Refer to the next page for more information on how to
select the desired Program from multiple Programs on
the disk.
After overdubbing and ping-pong recording, you can mix all track data into two channel stereo data and
record it onto your master recorder. This final process of multitrack recording is called “mixdown.”
The mixdown signals are usually output from the mixer’s STEREO OUT L/R. Connect the master recorder
The explanation so far has been based on one Program set up when you format a current drive (E-IDE
hard disk or SCSI disk). You may create up to 99 Programs, depending on the available disk space.
Multiple Programs do not interfere with each other. You can record, play, and edit each Program
independently, which facilitates song management. This section explains how to set up a new Program
on the disk. Refer to the reference manual for more information regarding Programs.
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
44.1kHz
SETUP
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
42
∞
_
OL
0
8
7
6
5
4
3
2
1
30
24
18
12
9
6
3
16
15
14
13
12
11
10
9
1. Set all tracks to the SAFE status.
2. Locate the top of the Program on this recorder.
3. Set the master recorder to REC-STANDBY mode.
4. Play the Program from the beginning and adjust
the recording level on the master recorder while
adjusting the tonal quality and mix balance of
the playback sound from the mixer. (Rehearsal)
Adjust the input level on the master recorder so that the
STEREO OUT L/R meters on the mixer respond to the same
degree as the level meters on the master recorder.
5. Locate the top of the Program.
6. Start recording on the master recorder. (Take)
7. Press the PLAY button on this recorder to start
playing the Program from the beginning.
8. When mixdown is completed, stop the master
recorder and this recorder.
When creating a new program, the initial settings such
as the tempo map are copied from the current program.
For example, if the default tempo map is edited in the
current program, the edited tempo map is copied to the
newly created program.