FujiFilm A330 User Manual

Page 32

Viewing

Images

Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.

●

Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop mid way through. When
printing stops mid-way, briefly turn the camera off and then
on again.

6.2.2 Specifying images for printing without using DPOF (single-frame printing)

AC-3V (sold separately)

(USB)socket

Set to “¢” in the “USB MODE” setting in the
“SET-UP” menu (

➡P.48).

●

Do not connect to a PC when the “USB MODE” setting is set
to “

”. See P.81 if you connect to PC by mistake.

1 Connect the camera to the printer using the USB

cable (included).

2 Turn the printer on.

●

The camera cannot be used to specify printer settings such
as the paper size and print quality.

●

Please connect the AC Power Adapter AC-3V (sold
separately) or AC-3VW (included with optional PictureCradle
CP-FXA10) to your camera.

●

Use an xD-Picture Card that was formatted on the camera.

Press the “Playback” button to turn the camera on
in Playback mode.
“ç ” appears and then the menu
screen is displayed.

●

If the menu screen does not appear, check whether the USB
mode setting is

“

”.

●

Depending on the printer, some functions are disabled.

Continued

If a printer that supports PictBridge is available, images can be printed by connecting the camera
directly to the PictBridge-compatible printer without using a computer.

6.2.1 Specifying images for printing on the camera

1 Press “a” or “b” to select “

PRINT DPOF”.

2 Press the “MENU/OK” button.

●

When

“

”

appears, the DPOF settings are

not specified.

●

To use DPOF printing, the DPOF settings must be specified
on FinePix A330/FinePix A340 beforehand (

➡P.35).

●

Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.