FujiFilm A330 - Manual (Page 31)

61
Viewing
Images
6
6.1 CAMERA CONNECTION
6 Viewing
Images
Do not connect the AC power adapter to charge the
AA-size nickel-metal hydride batteries. Please use
the optional charger (
➡P.73).
Check that the camera is turned off. Plug the AC
power adapter connector into the “DC IN 3V”
socket and then plug the AC power adapter into the
power outlet.
● ! The socket-outlet shall be installed near the equipment and
shall be easily accessible.
● ! The shape of the plug and socket-outlet depends on the
country of use.
AC-3V
DC IN 3V
socket
✽ Sold separately
Always use only the FUJIFILM “AC Power Adapter AC-3V” or the “AC Power Adapter AC-3VW”
bundled with the PictureCradle CP-FXA10 (
➡P.73).
Use the AC power adapter to avoid losing power at inconvenient times, such as when you are
downloading photographed images to your computer. You can take pictures and play back images
without worrying about depleting the batteries.
● ! See P.75 for notes on using the AC power adapter.
● ! By using the optional cradle, the AC power adapter bundled with the cradle must be used. The use of AC power adapters
other than the bundled product will cause faults.
● ! Only connect or disconnect the AC power adapter when the camera is turned off.
Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply
to the camera, so that images or movies being shot are not recorded. Failing to turn the camera off first can also result in
damage to the xD-Picture Card or malfunctions during PC connection.
6.1.1 Using the optional AC Power adapter
Turn off the camera and TV. Plug the Video cable
(provided with the camera) into the “VIDEO OUT”
(video output) socket.
Plug the other end of the cable into the video input
socket on the TV. Then turn the camera and TV on
and playback images as you would normally.
● ! Images are only sent to the TV in Playback mode (FinePix
A330 only).
● ! If there is a power outlet available, connect the AC-3V AC
Power Adapter.
● ! Refer to the instructions provided with your TV for more
information on video input for your TV.
● ! The image quality for movie playback is lower than for still
images.
6.1.2 Connecting to a TV
DC IN 3V socket
VIDEO OUT socket
1
2
To video
input socket
60
5.3 INSTALLATION ON A Mac OS X
10 The “FinePixViewer installation completed” message dialog appears then click exit button and
close it.
11 Launch “Image Capture” from the “Applications” folder.
12 Change the Image Capture settings.
Select “Preferenes...” from the “Image Capture”
menu.
14 Select “FPVBridge” from “FinePixViewer” folder in
the “Applications” folder and click the “Open” button.
15 Select “Quit Image Capture” menu in the “Image Capture” menu.
8 The “FinePixInstallOSX” window appears.
Click the “Install” button to install FinePixViewer and RAW FILE CONVERTER LE.
9 The ImageMixer VCD2 installer automatically starts up and a window showing the installation
progress appears. (Installation may take several minutes.)
13 Select “Other...” from “When a camera is connected, open”.