FujiFilm 1400 - Manual (Page 30)

58 59
4
➀ Use the “ ab ” button to select “TRIMMING”.
➁ Press the “MENU/EXE” button to switch to the
Trimming selection screen.
You can alternate between the Zoom and Shift
screens by pressing the “DISP” button.
Using the Zoom screen:
Use the “
ab ” button to zoom in and out.
(The zoom scale increases in increments of 0.2 ✕ up to 2.0 ✕ )
Using the Shift screen:
Use the “
ab ”, “ c ” and “ d ” buttons to shift the
position of the area to be trimmed.
● ! Display the frame to be trimmed before beginning
the above procedure ( ➡ P.29).
● ! Trimming can only be specified for images with a
File Size setting of 1280 ✕ 960.
● ! When images with File Size other than 1280 ✕ 960
are played back, TRIMMING does not appear on the
menu.
● ! Trimmed images cannot be smaller than 640 ✕ 480
pixels.
● ! After trimming, the aspect ratio of the image is 4:3,
which is the same as that of the recorded image.
➀ Use the “ ab ” button to specify the number of
prints.
➁ Press the “MENU/EXE” button to confirm the
settings and return to the menu screen.
The “
U
” icon is displayed for the frame for
which trimming has been confirmed.
3
When you press the “MENU/ EXE” button, the
cropping settings are determined as shown in
the image on the LCD monitor.
1 2 4
Zoom screen
Shift screen
➀ ➁
R DPOF TRIMMING
PLAYBACK MENU
➀ ➁