FujiFilm 1400 - Manual (Page 24)

47
4
46
A confirmation screen appears.
If you are erasing all the frames or formatting the
card, press the “MENU/EXE” button to proceed.
If you are erasing one frame, use the “
d ” and
“ c ” buttons to select the frame and then press
the “MENU/EXE” button.
3
If you press the “MENU/EXE” button, the menu
screen will appear on the LCD monitor. ➀ Use the “ d ” or “ c ” button to select “ n ”
ERASE.
➁ Use the “ ab ” button to select “FRAME”, “ALL”
or “FORMAT”.
➂ Press the “MENU/EXE” button.
1
Formatting erases all of the data on the
SmartMedia.
2
● ! If the “ ” message is displayed, DPOF is
specified. When you press the “MENU/EXE” button,
the image is erased and the DPOF settings are
updated.
Erases only the selected image.
● ! Protected images ( ➡ P.48, 50) are not erased.
Erases all the images.
● ! This function cannot be used to erase protected
images.
Erases all the data and reformats (initializes)
the SmartMedia for use with this camera.
● ! Protected images are also erased.
FORMAT
ERASE ALL
ERASING SINGLE FRAME
● ! If the “
2
” message appears, wipe the
contact surfaces on the SmartMedia (the gold-
colored area) with a soft, dry cloth and then re-insert
it into the camera.
If this does not resolve the problem, format the card.
● ! If the “ ” message is displayed,
format the card.
● ! Press the “CANCEL/BACK” button to exit the menu
display.
➀
➁
➂
n ERASING SINGLE
• ALL FRAMES/FORMATTING
PLAYBACK MENU