FujiFilm 1400 - Manual (Page 13)

24 25
2
In a picture of this type, the subjects (people in
this case) are outside the AF frame.
If you take the picture at this point, the subjects
will not be in focus. Move the camera slightly so that only one of the
subjects are shown in the AF frame.
1 2 Number of available frames
The number of available shots is displayed on
the LCD monitor in the location shown in the
figure at left.
● ! See P.65 for information on changing the Quality
and File Size settings.
● ! At shipment, the default settings are NORMAL (for
Quality) and 1280
✕ 960 (for File Size).
● ! The FinePix1400 ZOOM can play back up to 1,000
image frames. Do not record more than 1,000
images on one SmartMedia. (See P.14 for details.)
■ Standard number of shots per SmartMedia : The number of shots that can be recorded onto a SmartMedia
card varies slightly depending on the type of subject. Also, the difference between the standard number of shots and
the actual number of available shots increases for SmartMedia with a higher capacity.
4MB (MG-4S)
8MB (MG-8S)
16MB (MG-16S)
32MB (MG-32S)
6 12 23 23 44 69
12 24 46 46 89 141
25 49 89 89 163 246
50 99 180 180 330 496
64MB (MG-64S) 101 198 361 361 663 995
Pixel
Quality Mode
Compression Ratio
Image Data Size
1280 ✕ 960 640 ✕ 480
FINE
Approx.1/8
Approx.610KB Approx.310KB Approx.160KB Approx.160KB Approx.90KB Approx.50KB
Approx.1/4 Approx.1/16 Approx.1/4 Approx.1/8 Approx.1/16
NORMAL BASIC FINE NORMAL BASIC
◆ AF/AE Lock ◆
On the FinePix1400 ZOOM, when you press the shutter button down half way, the focus and
exposure settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of
the image or if you want to set the exposure before you compose the final shot, lock the AF and AE
settings and then compose and shoot your picture to get the best results.
E TAKING PICTURES
E USING AF/AE LOCK