Furuno GP-7000 - Manual (Page 15)

3.2 Choosing Port I/O Format
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the
[ENTER] knob.
3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.
4. Rotate the [ENTER] knob to choose appropriate INPUT or OUTPUT item and then push
the [ENTER] knob.
GLL On
VTG On
BWR Off
DBT Off
DPT Off
MTW Off
VHW Off
WCV Off
APA Off
APB On
HDG Off
BOD Off
XTE Off
RMA Off
RMB On
RMC On
GGA Off
HSC Off
AAM Off
GTD Off
MWV Off
ZDA Off
WPL On
RTE On
TLL OUT On
NMEA-0183 1200-N81-N
NMEA-0183 4800-N81-N
NMEA-0183 4800-N82-N
NMEA-0183 9600-N81-N
NMEA-0183 9600-O81-N
C-COM
Disabled
NMEA1 Output
NMEA1 Input
RS232C W
NMEA
INPUT 3 MODE
(Choose format for
PC/NMEA IN port)
NMEA 1 INPUT, NMEA 1 OUTPUT menus
5. Do one of the following depending on item selected.
Input
a) Rotate the [ENTER] knob to choose appropriate option and then push the [ENTER] knob.
Below is the meaning of the NMEA options. “C-COM” is for connection of a GSM modem.
For details about the GSM modem, see its owner’s manual.
N M E A - 0 1 8 3 4 8 0 0 - N 8 1 - N
1 2 3 4 5 6
1 Data format
2 Baud rate: 1200, 4800, 9600(bps)
3 Parity: N (No parity) or O (Odd parity)
4 Character length (8)
5 Stop bit: 1 or 2
6 X-On/Off (non)
Description of NMEA options
b) Press ◄ to close the window.
11