Specifications of video plotter gd-1900c – Furuno NAVNET 1823C User Manual
Page 250
SP - 6
E3503S02H-M
SPECIFICATIONS OF VIDEO PLOTTER GD-1900C
1
DISPLAY UNIT
1.1
Indication System
PPI Daylight display, raster scan, color LCD
1.2
Display
10.4-inch rectangular TFT color LCD, 640(H) x 480(V) dots
1.3 Input Data
IEC 61162-1 (NMEA 0183 Ver1.5/2.0)
Own ship’s position:
GGA>RMC>RMA>GLL
Ship’s speed:
RMC>RMA>VTG>VHW
Bearing (True):
HDT>HDG
*1
>HDM
*1
>VHW
Bearing (Magnetic):
HDM>HDG
*1
>HDT
*1
>VHW
Course:
RMC>RMA>VTG
Water depth:
DPT>DBT>DBS>DBK
Wind:
MWV>VWT>VWR
Water Temperature:
MTW
Time:
ZDA
*1
: calculated by magnetic deviation
1.4 Output Data
Alarm signal
12 VDC, 100 mA or less
NMEA 0183 Ver1.5
GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
DPT or DBT, DBS (ETR required), TTM (ARPA required)
2
PLOTTER FUNCTION
2.1
Projection
Mercator
2.2
Usable Area
85 latitude or below
2.3
Effective Area
211.2 x 158.4 mm
2.4
Display pixels
640 x 480 dots
2.5
Position Indication
Latitude/longitude, Loran C LOP or DECCA LOP
2.6
Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)
2.7
Track Display
Plot interval: by time (1 sec. to 99 min. 59 sec.) or
by distance (0 to 99.9 nm)
2.8
Colors
Red, yellow, green purple, light-blue, blue, white
2.9
Memory Capacity
Track/mark: 8000 points, Waypoint: 999 points
2.10 Storage Capacity
Simple route: 200 routes with 35 waypoints each
2.11 MOB
1 point
2.12 Quick Routes
1 course with 35 waypoints max.
2.13 Electronic Chart
FURUNO chart card or NAVIONICS chart card available
C-MAP chart card also available for C-MAP NT Model
2.14 Alarms
Arrival and Anchor watch, Cross track error and proximity