Furuno NAVNET 1823C - Manual (Page 202)

5. CUSTOMIZING YOUR UNIT
5-28
5.8 Nav Data Display Setup
The nav data display shows various navigation data, fed from a navigator,
network equipment, etc. You may select the data to display and where to display
it as follows:
1. Press the [MENU] key to open the main menu.
2. Press the SYSTEM CONFIGURATION, SYSTEM SETUP, HOT PAGE & NAV
DISP SETUP and NAV DATA DISPLAY SETUP soft keys.
NAV
DATA
EDIT
RETURN
1 POSITION
2 WPT POS 3 SOG
4 STW 5 COG
6 BEARING 7 RANGE
8 DEPTH 9 TEMP
Nav data setup screen
3. Use the trackball to select a location.
4. Press the EDIT soft key. The following display appears.
POSITION
WPT POSITION
SOG
STW
COG
BEARING
RANGE
DEPTH
TEMPERATURE
LOG TRIP
TIME TO GO
ETA
DATE
TIME
WIND
¤
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
DISPLAY DATA
Nav data setup window
5. Select the data to display, then press the ENTER soft key or [ENTER] knob
to register your selection.
6. Press the RETURN soft key followed by the [MENU] key to close the menu.