Meridian Audio FDP-DILA3 - Manual (Page 39)

e
“Information” menu
When video input is selected
Adjustment item (press ᮡ / ᮢ ) Adjustment content (press ᮤ / ᮣ )
“Input” Displays the image input (VIDEO, Y/C,
PC2) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
0: not being used.
1-10: switcher number.
❈ For details, please check with your au
thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time” Displays the accumulated used hours of
the light-source lamp.
When PC input is selected
Adjustment item (press ᮡ / ᮢ ) Adjustment content (press ᮤ / ᮣ )
“Input” Displays the computer input (PC1, PC2,
PC3) when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
0: not being used.
1-10: switcher number.
❈ For details, please check with your au
thorized dealer.
“Resolution” Displays the resolution of the inputted sig-
nal. (Horizontal x vertical)
❈ Some inputted signals cannot be dis
played correctly.
“Frequency H” Displays the horizontal frequency of the
inputted signal.
“Frequency V” Displays the vertical frequency of the in-
putted signal.
“Lamp time” Displays the accumulated used hours of
the light-source lamp.
When no image signal is inputted
Adjustment item (press ᮡ / ᮢ ) Adjustment content (press ᮤ / ᮣ )
“Input” Displays the selected image input
(VIDEO, Y/C, PC1, PC2, PC3) when pro-
jecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
0 : not being used
1-10 : switcher number.
❈ For details, please check with your au
thorized dealer.
“Lamp time” Displays the accumulated used hours of
the light-source lamp.
Adjustments and Settings Using Menus
39