FieldServer FS-8700-43 - Manual (Page 14)

FS-8700-43 VESDA Driver Manual Page 14 of 28
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Appendix A.3. VESDA mapping format for Command 6 (Remote Input)
This command sends the Remote Input in a BIT data array.
Appendix A.3.1. Data Array
Column Title Function Legal Values
Data_Array_Name Provide name for Data Array Up to 32 alphanumeric characters
Data_Format Provides data format BIT
Data_Array_Length Number of Data Objects 1 - 8
Appendix A.3.2. Client Map Descriptors
Column Title Function Legal Values
Map_Descriptor_Name Name of this Map Descriptor Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array where data is to be
stored in the FieldServer Data_Array_Name defined in Section
Appendix A.3.1
Data_Array_Location Starting location in Data Array 0 –7
Function Function of Client Map Descriptor. Wrbx
Node_Name Name of Node to fetch data from
One of the Node names specified in
Section 5.2.
Data_Type Data type Dig_output
Length Length of Map Descriptor 1-8 (must not overflow the data array)
Address Starting address of read block 0-7
Command The command ID 6
Network* The network number 1-255, 0
Zone* The zone number 1-255, 0
Sector* The sector number 1-255, 0
Appendix A.3.3. Data Block Description 56
BIT offset Function
0
Stop Test
1 Scan Start
2 Start Test
3 Silence
4 De-Isolate
5 Isolate
6 Reset
7 Reserved
5 1 indicates TRUE; 0 indicates FALSE
6 ONLY 1 OF THE 8 BITS MAY BE SET IN ONE COMMAND