FUJITSU XG1200 - Manual (Page 24)

Installation Procedure 23
2
Before installing the XG1200, read " For Safe Use of the XG1200" (page 2) and comply with
the installation requirements described below.
When installing the XG1200, a certain amount of installation space is necessary.
When installing the rack, the indicated space (800mm of both the front and rear of the rack)
should be reserved as a service area.
The following figures indicate examples of a 540mm (W)
× 850mm (D) 19-inch rack and a
700mm (W) × 950mm (D) 19 inch rack.
When installing in any other 19-inch rack, refer to the user guide provided with the rack.
[540mm (W) × 850mm (D) 19-inch rack]
(Unit: mm)
[700mm (W) × 950mm (D) 19-inch rack]
(Unit: mm)
CAUTION
The XG1200 may be installed in any rack with an internal depth of between 673mm
and 770mm, except for the following ranges:
723mm - 726mm
743mm - 746mm
753mm - 756mm
763mm - 766mm
2-2
Installation Procedure
This chapter describes the installation requirements and installation procedure.
2-2-1 Installation requirements
Space requirements
800
540
Rack Service area
(Rear)
Service area
(Front)
800 850
(Top)
Front
800
700
Rack Service area
(Rear)
Service area
(Front)
800 950
Front
(Top)