Fisher-Price X3419 - Manual (Page 14)

X3419pr-0920
14
• Insert and "snap" the key assembly into the slot in
the dash.
28
Key
Assembly
ASSEMBLY
• Insert and "snap" the steering wheel cap into the center of
the steering wheel.
Steering Wheel Cap
• While pressing down on the steering wheel, grasp the
steering column under the dash and pull it up as far as it
will go.
• Insert the 5 /
32
" (0,4 cm) x 1 1 /
2
" (3,8 cm) pin through the
hole in the steering column.
• Grasp the steering column again and pull down to fit the
pin into the center of the steering wheel.
Press Wheel Press Wheel
Lift Steering
Column
Press Wheel
Steering
Column Cap
• Fit the steering column cap onto the end of the
steering column.
• Insert a #8 x 3 /
4
" (1,9 cm) screw through the large
opening in the steering column cap and into the hole in
the steering column. Tighten the screw.
• Turn the vehicle upright.
25
26
27
#8 x 3/4" (1,9 cm) #8 x 3/4" (1,9 cm)
Screws Screws