Fisher-Price X3419 - Manual (Page 13)

13
X3419pr-0920
ASSEMBLY
• Insert the curved end of the steering column through the
hole in the steering rod.
Steering
Rod
Steering
Column
• Insert two #8 x
3
/
4
" (1,9 cm) screws into the sides of the
windshield/dash. Tighten the screws.
• Close the doors on the vehicle.
DASH VIEW
• Wipe the steering column with a paper towel to remove
any excess lubricant.
• First, insert the straight end of the steering column down
through the hole in the metal bar A ; then through the
hole in the vehicle floor B ; and finally, out through the
hole in the dash.
Steering
Column
Metal
Bar Hole
BOTTOM VIEW
A
B
Vehicle
Hole
IMPORTANT! Turn the vehicle on its side or over to
complete assembly steps 23-28.
• Position the steering wheel so that the large opening
is UP.
• Fit the steering wheel onto the steering column.
Steering Wheel
Steering Column
Large Opening
DASH VIEW
21
23
24
22
#8 x
3
/
4
" (1,9 cm) Screws