Set time and date – FOCUS Enhancements DVCPRO/DV User Manual
Page 48
FS-100 Portable DTE Recorder
30
Set Time and Date
1.
Press the
Right
navigation button several times until the
Setup display appears on the screen as shown below:
2.
Use the
Down
navigation button to highlight the date and
press the
Right
navigation button to access the Set Date
screen.
3.
Use the
Up
and
Down
navigation buttons to change the
highlighted value. Use the
Right
and
Left
navigation buttons
to highlight the Month, Day, and Year.
4.
When complete, press the right-most Function button
indicated as
BACK
on the screen. The new date will be
indicated on the Setup Screen.
Date and Time Must Be Set
The date and time must be set because they are used in the FS-100 file
naming function.
SETUP
09 / 15 / 05
11 : 21 : 13
V 3 . 1. 0
-LCDLIGHT ON
SET DATE
09
/ 15 / 05
MM / DD / YY
BACK