FOCUS Enhancements DVCPRO/DV - Manual (Page 57)

Quickstart
FS-100 Portable DTE Recorder
39
FS-100 Settings
1. Set DV FORMAT to QUICKTIME PN or P2 PN .
2. Set SETUP-->VFR MODE to the appropriate base frame
rate:
While recording in VFR mode, VF is displayed on the HOME
screen below the battery indicator. If the VF is not displayed
there is a setup issue: please, review the settings shown above.
For more information, see VFR MODE on page 66.
Preparing P2 File for NLE
Run the utility Organize P2 before using the recorded P2 file in a
NLE. Refer to Organize P2 on page 76.
Recording Timecode in the File
Select EXT TC in the Setup menu. This option records the video
camera timecode in the file. There are other timecode options
available, refer to TIME CODE EXT, REC RUN, FREE RUN, REGEN
on page 62.
Input Stream VFR MODE
720/24P 24
720/25P 25
720/30P 30
Run the Organize P2 Utility or the files are not usable by a NLE.
Function buttons
The tasks discussed above are available for programming into the function
buttons. For information on setting up function buttons, refer to the section,
Functions Screen on page 71.