Repair clip, Run repair clip after organize p2 – FOCUS Enhancements DVCPRO/DV User Manual
Page 101
FS-100 Portable DTE Recorder
83
Repair Clip
Use this function to repair a specific file that may be damaged or
incomplete. For example, recording terminates due to a loss of power
to the FS-100 and a specific file may be damaged. Repair Clip scans
the specified file checking for and repairing file errors and
incomplete files. When the file is repaired, it then can be used in the
NLE system.
1.
From the Utilities screen, go to
Repair Clip
.
2.
Enter the number of the clip to be repaired, using the
Up
and
Down
navigation buttons.
3.
Press
YES
and the FS-100 begins repairing the file.
A status screen displays the progress of disk repair and at
completion displays the message:
•
Complete
indicating Repair Disk was successful.
•
Aborted
indicating that there were errors and the repair
did not complete.
4.
Press
BACK
to return to the
Utility
screen.
5.
Move content from the FS-100.
6.
Use Format Disk utility before doing any further recording.
This step optimizes disk storage, see
Run Repair Clip after Organize P2
After repairing an organized P2 clip, again run the utility
ORGANIZE P2
, see page 76, to make the clip available for use
with the NLE.
REPAIR CLIP
CLIP 000
YES BACK