13 tt preset menu setting – Furuno 2127 User Manual
Page 51
3. SETTING AND ADJUSTMENT
3-13
TT PRESET menu setting
Open the TT PRESET menu by pressing [6] key on the INITIALIZE menu.
[TT PRESET]
1 BACK
2 TT DATA OUTPUT
OFF/TTM/TTD
REL/TRUE
4800/9600/
19200/38400
3 MAX RANGE
24/32
4 ECHO LEVEL
16
5 QV DISPLAY
OFF/ON
6 TT W/O GYRO*
OFF/ON
7 [TT PRESET]
8 [TRACK PRESET]
9 [TT SENSOR DATA]
0 DEFAULT
1 BACK
2 LAND SIZE
1600 M
3 ANT SELECT
XN12AF/XN20AF/
XN24AF/XN4A/XN5A
SN30AF/SN36AF/
SN4A/SN5A
4 AUTO ACQ CORRE
5 SCAN
5 AUTO ACQ WEED
1 SCAN
6 [TT DETAIL DATA]
1 BACK
2 GATE SIZE
S/ M /L/LL
3 FILTER RESPONSE
1/ 2 /3/4
4 LOST COUNT
9 SCAN
5 MAX SPEED
100 KTS
6 TRACKING MODE
1 /2/3/4
7 START TIME TGT VECT
TIME /SCAN
50 SEC
20 SCAN
[TT PRESET]
[TRACK PRESET]
*: Not on IMO radar
TT DATA OUTPUT
Set the output format from J619 (sentence, bearing and baud rate) of tracked targets.
Sentence:
(OFF: No output, TTM: Tracked target information, TTD: Tracked target data)
Bearing:
REL: Target bearing from own ship, degree relative,
target course, degree relative.
TRUE: Target bearing, degree true, target course, degree true.
Baud rate: (4800, 9600, 19200 or 38400 bps)
NOTE: The TT DATA OUTPUT port changes according to the setting for INS as described
on page 3-15.
INS-OFF:
Output from J619 port only
INS-SERIAL: Output from J619 and J620 (TTM only) ports
INS-LAN:
Output from J619 and NETWORK (TTM only) ports
MAX RANGE
Choose the target tracking range, 24 or 32 nm.
ECHO LEVEL
Set the detection level of echoes. The setting range is 1 to 31.
QV DISPLAY
OFF: Normal picture
ON: Quantized picture; always off at power on