Furuno 2127 - Manual (Page 16)

1. MOUNTING
1-8
Desktop mounting
Use the optional accessories to mount the monitor unit on a desktop.
• For FAR-2117/2127: FP03-09820 (Code No.: 008-535-560)
• For FAR-2817/2827: FP03-09830 (Code No.: 008-536-020)
Contents of FP03-09820/09830
Name Type Code No. Qty Remarks
Hanger L 03-163-1111 100-305-141 1
Hanger R 03-163-1112 100-305-181 1
03-163-1113 100-305-191 For FAR-2117/2127
Hanger stay
03-163-2071 100-305-371
1
For FAR-2817/2827
Hole plug CP-30-HP-13 000-160-074-10 2
Plastic rivet KB-13 Rivet Black 000-570-276-10 4
Hex. bolt M6x25 000-162-949-10 4
Hex. bolt M10x30 000-162-884-10 2
Spring washer M10 000-864-261 2
Flat washer M10 000-864-131 2
1. Assemble two hangers and hanger stay with two hex bolts (M10x30), flat washers and
spring washers and cover each hex bolt with hole plug.
2. Fix the above assembly to the mounting location with four hex bolts (M12, dockyard
supply).
3. Fasten the monitor unit to the mounting hanger assembly with four hex bolt (M6x25,
supplied).
4. Cover each hex bolts with panel cover.
5. Cover each holes for hand grip on the hangers with plastic rivets (4 pcs).