FujiFilm FinePix A700 - Manual (Page 81)

81
Camera Conn
ection
Disconnecting the printer
A Check that “PRINTING” is not displayed on the
camera’s screen.
B Turn the camera off. Unplug the USB cable (mini-B).
MEMO
DPOF setting can be specified for images on internal
memory.
CAUTION
• In PictBridge function, images photographed on other
than a camera may not be printed.
• Do not connect to a PC when the USB MODE setting is
set to < PICTBRIDGE. See p.112 if you connect to
a PC by mistake.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or an xD-Picture Card that was
formatted on FinePix A700.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
A700 may not be printed.