FujiFilm FinePix A700 - Manual (Page 73)

73
Settings
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your batteries.
CAUTION
The Auto power off function is disabled during automatic
playback (
➝p.55), discharging rechargeable batteries
( ➝p.100), and when a USB connection (➝p.78, 88) is
being used.
To restore power to the camera
Refer to “Turning On and Off” (
➝p.19).
The LCD monitor darkens when camera is not used for 10
seconds.
When this function is active, you can save power and get
the maximum possible running time from your batteries.
MEMO
Pressing any button wakes the camera up.
CAUTION
The LCD power save function is disabled during Playback
mode and Movie mode.
Initialize (format) the xD-Picture Card or internal memory
for use with the camera.
CHECK
Initializing internal memory takes about 15 seconds.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media.
• Do not open the battery cover during formatting, as
formatting will be interrupted.
AUTO POWER OFF
LCD POWER SAVE
FORMAT
A Press p or q to select OK.
B Pressing MENU/OK initializes
the xD-Picture Card or internal
memory.
FORMAT OK?
ERASE ALL DATA
CANCEL OK
SET
FORMAT Place of initialize
Y FORMAT:
Internal memory
\ FORMAT:
xD-Picture Card
How to use the SET-UP menu (
➝p.68)