FujiFilm FinePix A303 - Manual (Page 91)

91
7
AC power
adapter
✽
Camera
(USB) socket
Plug the AC power adapter connector into the
DC IN 3V socket on the camera and then plug
the adapter itself into the main power outlet.
1. Slide the power switch to the side to turn
the camera on.
2. Set the “USB MODE” setting in the
“SET–UP” menu to “PC CAM” (
➡P.72, 73).
3. Slide the power switch to the side to turn
the camera off.
✽It is recommended that you connect the AC Power
Adapter AC-3VH (sold separately) (
➡P.87). Constant
4. Switch your PC on.
5. Use the special USB cable to connect the
camera to your computer.
6. Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera
(
➡P.94).
✽Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
If you are using a Windows PC, the driver
settings are automatically specified when
installation ends. Just wait a few moments.
7.3 Use at PC-CAM mode
USB
socket
PC
✽ Sold separately
power supply will prevent successful data transfer
from trouble caused by power supply.