FujiFilm FinePix A303 - Manual (Page 86)

86
■ DSC (Mass storage device) Mode
This mode provides a simple way to read images
from an xD-Picture Card and store images on to
an xD-Picture Card (
➡P.88).
The first time you connect the camera
to your computer by referring Section 6
You must install all of
the software before
connecting the camera
to your computer.
■ PC CAM (PC Camera) Mode
This function allows you to conduct
videoconferencing sessions between PCs
connected to the Internet (
➡P.91).
✽Videoconferencing (“PictureHello”) is not
supported on Macintosh computers.
✽Connection is only possible with a FUJIFILM camera
equipped with a “PC Camera” function.
CD-ROM
(Software for FinePix SX)
For more information on using the software,
refer to “How to use FinePixViewer” in the HELP
menu which was installed from the CD-ROM.
If the power cuts out during data transmission,
the data will not be transmitted correctly. Always
use the AC power adapter when connecting the
camera to a computer.
The “Camera Connection” section explains how
to connect the camera to your computer using
the special USB cable and describes the
functions you can use once the camera and
computer are connected.
7 Camera Connection