Furuno GP-1650WDF User Manual
Page 54
7. ROUTES
7-4
Inserting waypoints on the plotter
display
Inserting waypoints before the first
waypoint or after the last waypoint
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE soft key.
4. Press the PLOT soft key to show the
plotter screen.
5. Operate the cursor pad to place the
cursor on the first or last waypoint of the
route which you want to insert.
6. Press the ADD TO START (ADD TO
END) soft key.
7. Operate the cursor pad to place the
cursor on an existing waypoint (ADD
WPT soft key appears) or new location
(ADD NEW WPT soft key appears).
8. Press the ADD WPT (ADD NEW WPT)
soft key.
9. Press the [ENTER] key.
When you want to insert waypoints after the
last waypoint, press the “ADD TO END” soft
key at step 6.
Inserting waypoints in an intermediate
location within a route
1. Follow steps 1 through 4 in “Inserting
waypoints before the first waypoint or
after the last waypoint.”
2. Operate the cursor pad to place the
cursor on a line connecting waypoints.
3. Press the SPLIT LEG soft key. The
selected line turns red.
4. Operate the cursor pad to place the
cursor on an existing waypoint (INSERT
WPT soft key appears) or new location
(INSERT NEW WPT soft key appears).
5. Press the appropriate soft key, INSERT
WPT or INSERT NEW WPT.
Removing waypoints from routes
Removing route waypoints through the
route list
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE and LOCAL LIST
soft keys to show the waypoint list.
4. Press ▲ or ▼ to select the waypoint you
want to delete.
5. Press the REMOVE WPT soft key.
Removing route waypoints from the plotter
display
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE soft key.
4. Press the PLOT soft key to show the plot
screen.
5. Operate the cursor pad to place the
cursor on the waypoint you want to
remove from the route.
6. Press the REMOVE WPT soft key.