Fisher-Price 74260 - Manual (Page 13)

Assembly
13
8
• Align the holes in the seat with the holes in the
vehicle body.
• Insert two #8 x 1" screws through the holes in the seat
and into the vehicle body.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
9
10
• Fit the blanket onto the saddle area of the pony body.
• Insert two #8 x 3 /
4
" screws through the holes on each
side of the blanket.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Holes
Seat
Blanket
Blanket
Pony
Body
Pony Body
• Position the pony body upside down.
• Fit the flat side of the blanket strap against the ridge in
the pony body.
• Fold the blanket flaps down as shown.
11
Blanket Strap
Flat Side
Pony Body
Ridge
Blanket
Flap
Blanket
Flap
Bottom View