FujiFilm FinePix 3800 User Manual

Page 51

101

100

i When the camera and computer are

exchanging data, the self timer lamp blinks
and the indicator lamp blinks alternately green
and orange.

i The lens is fixed at the wide-angle zoom setting.
i “PC CAM” appears on the screen.
i Power Save is disabled when the camera is

connected to a USB port.

✽Do not disconnect the USB cable when the camera is

communicating with the PC. See P.102 for information
on the disconnection procedure.

✽If the camera is used as a PC camera, a light source

such as fluorescent tube stand can be used to
illuminate the subject and get a brighter image.

✽When the camera is connected to a computer as a PC

camera, the color tones on the screen may change
briefly.

■ PC Operation

1. FinePixViewer automatically starts up and

the PictureHello window opens (Windows
only).

✽ Screen for Windows 98 SE

■ Camera Operation

If the above operations do not occur, you do not
have the required software programs or drivers
installed on your PC. Complete the required PC
setup procedures. Then reconnect the camera
to your PC.

If the “Digital Signature Not Found” dialog box
appears, click the [Yes] button.

The USB PC Camera Driver is installed automatically.
When the following screen appears, click the
[Continue] button.

3. FinePixViewer starts up automatically and

the live image is displayed.

If the live image does not appear, refer to
“Troubleshooting” in FinePixViewer User’s Guide (PDF).

The Exif Launcher installed with the FinePixViewer
automatically launches FinePixViewer when you
connect the camera to your PC.

TIP

NOTE

Windows XP

Windows 2000 Professional

2. Check PC operation. The installation

procedure differs depending on the
operating system running on your PC.

✽ This step is not required for subsequent

connections.

The “New Hardware Found” wizard appears. The
wizard will close when the settings are completed.
No action is required.

✽ The Windows CD-ROM may also be required

during installation. In this event, switch CD-ROMs
as directed by the on-screen instructions.

Windows 98/98 SE/Me