beautypg.com

Power save, 6 software installation, 1 the software components – FujiFilm FinePix 3800 User Manual

Page 42

background image

83

6

82

POWER SAVE

SET–UP

When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.

!

Operation can also be restored by pressing buttons
other than the shutter button.

Bebeep

To restore power to the camera

Turn the Power switch to
“OFF” briefly and then
back to “q”.

hPower saving “OFF” (default setting)
The camera does not use measures such as
“sleep” to reduce power consumption. However, if
the camera is not used for approximately 2 minutes,
this function automatically switches the camera off.

hPower saving “ON”
Power consumption is kept to a minimum to
prevent battery depletion.

i If the camera is not used for approximately 30

seconds, the screen switches off temporarily
to reduce power consumption (Sleep mode).

i Once the camera is in Sleep mode, if it is left

unused for a further 90 seconds, it is
automatically switched off.

i The charging time for the flash increases

slightly because the flash charging power is
reduced.

Software needed for playing back movies, etc.

Launches the FinePixViewer
software when a camera is
connected.

Software used to read PDF-format documents on a
personal computer. This software is needed to read the
User’s Guides for FinePixViewer.

Creates a FinePix CD Album.

Used for videoconferencing (Windows only)

Allows you to display thumbnail lists of the
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.

✽ Note that the software configuration differs slightly depending on your operating system.

Connect the camera
with “DSC” selected as
the USB setting
(

➡P.96).

Connect the camera
with “PC CAM”
selected as the USB
setting (

➡P.99).

Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).

Allows a digital camera to be
used as a PC Camera.

ImageMixer VCD
for FinePix

FinePixViewer

PictureHello

Acrobat Reader

R

QuickTime

USB PC Camera

Driver

Exif Launcher

USB Mass Storage

Driver

6 Software Installation

6.1 The Software Components