Multi-frame playback, Viewing your images (playback) – FujiFilm FinePix 3800 User Manual
Page 20
39
2
38
MULTI-FRAME PLAYBACK
w
PLAYBACK
Text displayed
No text displayed
Multi-frame playback
1
2
0
1
0
2
●
!
The screen text display disappears after approximately
3 seconds.
●
!
Playback zoom cannot be used with multi-frame
playback.
In playback mode, the display shown on the
screen switches each time you press the “DISP”
button. Press the “DISP” button until the multi-
frame playback screen (9 frames) appears.
1 Select a frame by using “d”, “c”, “a” and “b”
button to move the cursor (the orange box) to
the desired frame. Press “a” or “b” several
times to switch to the previous page or the
next page.
2 You can enlarge the selected image by
pressing the “DISP” button again.
VIEWING YOUR IMAGES (PLAYBACK)
w
PLAYBACK
During playback, you can skip backwards or
forwards through the images (the frame number
increases or decreases) by holding down “d” or
“c” for approximately 1 second.
The displayed image does not change, but a
progress bar indicates the approximate playback
location on the xD-Picture Card.
1Set the Power switch to “
w
”.
2Use the “d” and “c” button to move forward
and backward respectively through your
images.
●
!
When you set the Power switch to “q”, the last
image shot is displayed.
●
!
You can use this camera to play back still images
recorded on an FinePix 3800 or still images (excluding
some uncompressed images) recorded on any
FUJIFILM digital camera that supports xD-Picture
Cards.
Playback frame number
0
1
0
2
Fast Forwarding Images