FujiFilm FinePix A120 - Manual (Page 23)

45
Settings
4
44
SET-UP
F USING THE SET-UP SCREEN
● ! Always turn the camera off when replacing the batteries.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
1 Press the “MENU/OK” button to display the
menu on the LCD monitor.
2 Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “SET-UP”.
3 Press the “MENU/OK” button to display the
SET-UP screen.
Press “d” or “c” to move to option 1 to 4.
After you have changed the settings, press the
“MENU/OK” button to confirm the changes.
1 Press “a” or “b” to select a menu option.
2 Press “d” or “c” to change the setting and then
press “c” for “FORMAT”, “DATE/TIME”, “TIME
DIFFERENCE”, “DISCHARGE” or “qRESET”.
3
4
0 1 0 2
0 1 0 2 0 3
1
2
1 Press the “Playback” button for approx. 1
second to turn the camera on in Playback mode.
2 Press the “MENU/OK” button to display the
menu on the LCD monitor.
1 Press “d” or “c” to select “F” OPTION and
then press “a” or “b” to select “6LCD”.
2 Press the “MENU/OK” button.
2
1 Press “d” or “c” to adjust the LCD monitor
brightness.
2 Press the “MENU/OK” button to confirm the new
setting.
3
● ! To exit this procedure without changing the settings, press
the “DISP/BACK” button.
0 1 0 2
0 1 0 2
1
6 ADJUSTING THE MONITOR BRIGHTNESS
4
Settings
0 1 0 2