FieldServer FS-8704-09 SNMP - Manual (Page 12)

FS-8704-09 SNMP Driver Manual Page 12 of 39
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: [email protected]
5.2. Server Side Connection Descriptors
Section Title
Adapter
Column Title Function Legal Values
Adapter Adapter Name N1, N2 3
Protocol Specify protocol used SNMP
SNMP_Community*
This parameter can be
configured if it is required that
“Community” be a different name
in order to receive traps. Any string up to 255 characters,
Public
Example
// Server Side Connections
Adapters
Adapter, Protocol
N1, SNMP
5.3. Server Side Node Descriptors
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for Node
Up to 32 alphanumeric
characters
Protocol Specify protocol used SNMP
Example
// Server Side Nodes
Nodes
Node_Name, Protocol
Agent 1, SNMP
5.4. Server Side Map Descriptors
No Server Side Map Descriptors are required by SNMP for Get or Set requests, since the mapping of
FieldServer Data Arrays into the SNMP OID addressing scheme follows the method outlined in
Section 5.1 above. Server Side Map Descriptors are required to configure SNMP TRAPS as outlined
in Appendix A.
Scaling on Client side is per normal model but on Server side, normal model only applies if a Map
Descriptor is used.
3
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.