FUJITSU MAF3364LP - Manual (Page 80)

C141-E064-03EN 4 - 27
(4) External operator panel connector Signals
a. 16-bit SCSI –ID3, –ID2, –ID1, –ID0: Input signals (CN-2-02, 04, 06, 08 pin)
These signals are used for providing switches to set the SCSI ID of the IDD externally.
Figure 4.29 shows the electrical requirements.
Figure 4.29 16-bit SCSI ID external input
CN2-02
CN2-04
CN2-06
(IDD)
CN2-08