3 replacing pick roller, Replacing pick roller -5, Pick roller replacement -5 – FUJITSU M3093DE User Manual

Page 37

5 – 5

③

Insert the pad assembly into the ADF frame hole (the bigger one),
slide the assembly to the direction of the arrow until it clicks.

Pad assy

ADF frame

NOTICE: Pad can be replaced by aligning the holes of the pad with the pins of the Pad holder.

Figure 5.4

Pick Roller replacement

Guide A

Thumb Screw

5.4.3

Replacing pick roller

Replace the pickroller as follows.

a. Pull the cap up to open the ADF

unit.

b. Remove two thumb screws

shown in Figure 5.4. And re-
move the Guide A.

Pad

Pick spring

Pad holder