FUJITSU M3093DE - Manual (Page 26)

4 – 4
4.2.3 Reading a document larger than the document board
If the size of the document is larger than the document board, read the
document using the following procedure:
① Open the document cover at an angle of about 80°, then slide the
cover to the direction of the arrow to remove it.
② Place the document face down on the document bed.
③ Place the document cover over the document.
④ Instruct the scanner to start scanning from the host computer.
⑤ After the read operation, remove the document, replace the
document cover. Mount the document cover to the original
position, and close the document cover.
80°
Document cover
Document bed
NOTICE: Do not remove the document cover for any other purpose.
Figure 4.2 Removing the document cover