1 spare area, 2 alternating defective sectors – FUJITSU MPG3XXXAH User Manual
Page 182
C141-E112-01EN
6 - 11
6.4.1
Spare area
Following two types of spare area are provided in the user space.
1) Spare sector for sector slip:
used for alternating defective sectors at formatting in shipment (128 sectors/32 cylinders)
2) Spare cylinder for alternative assignment:
used by automatic alternative assignment. (4 cylinders/drive)
6.4.2
Alternating defective sectors
The two alternating methods described below are available:
(1)
Sector slip processing
A defective sector is not used and is skipped and a logical sector address is assigned to the
subsequent normal sector (physically adjacent sector to the defective sector).
When defective sector is present, the sector slip processing is performed in the formatting.
Figure 6.7 shows an example where (physical) sector 5 is defective on head 0 in cylinder 0.
2
1
Index
Head 0
Defective
sector
If an access request to sector 5 is specified, the device accesses physical sector 6 instead of sector 5.
Sector (logical)
Sector (physical)
Cylinder 0
4
3
6
5
605
608
607
606
8
7
2
1
4
3
6
5
7
607
606
Figure 6.7
Sector slip processing
unused