Installation on a mac os x, Pre-installation checklist – FujiFilm FinePix A400 User Manual
Page 87
87
Softw
are Installation
Installation on a Mac OS X
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
Models with a USB port as a standard feature
*
2
This software does not support QuickTime 7.
*
3
Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Pre-installation checklist
Compatible Mac
Power Macintosh G3
*
1
, PowerBook G3
*
1
,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, or Power Macintosh G5
Operating System
Mac OS X (compatible with version 10.2.8 to 10.3.9)
*
2
RAM
192 MB minimum
256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display
800 × 600 pixels or better, at least 32,000 colors
Internet connection
*
3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k bps or better recommended
• Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an
extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
Continued