FujiFilm FinePix A400 - Manual (Page 75)

75
Settings
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your batteries.
The LCD monitor darkens when camera is not used for 10
seconds.
When this function is active, you can save power and get
the maximum possible running time from your batteries.
Initialize (format) the xD-Picture Card or internal memory
for use with the camera.
AUTO POWER OFF
The Auto power off function is disabled during automatic
playback (
➝p.60), discharging rechargeable batteries
( ➝p.101), and when a USB connection (➝p.80, 90) is
being used.
To restore power to the camera
Refer to “Turning On and Off” ( ➝p.21)
LCD POWER SAVE
Pressing any button wakes the camera up.
The LCD power save function is disabled during Playback
mode and Movie mode.
FORMAT
A Press p or q to select OK.
B Pressing MENU/OK initializes
the xD-Picture Card or internal
memory.
Initializing internal memory takes about 15 seconds.
The Format function erases all the frames (files), including
protected frames (files).
Back up important frames (files) onto your PC or another
media.
FORMAT OK?
ERASE ALL DATA
CANCEL OK
SET
FORMAT Place of initialize
Y FORMAT:
Internal memory
\ FORMAT:
xD-Picture Card
How to use the SET-UP menu ( ➝p.70)