FujiFilm FinePix A400 - Manual (Page 107)

107
Ap
pendices
\ NO IMAGE
Y NO IMAGE
An attempt was made to transfer images from the
xD-Picture card or internal memory that memory
was empty. It is impossible to copy.
` CAN NOT TRIM An attempt was made to trim a 0.3M image. The image cannot be trimmed.
CAN NOT TRIM
• An attempt was made to trim an image shot using
a camera other than FinePix A400 / FinePix A500.
• The image is damaged.
The image cannot be trimmed.
DPOF FILE ERROR
Prints were specified for 1000 or more frames in the
DPOF frame settings. The maximum number of frames for which prints can
be specified on the same xD-Picture Card is 999.
Copy the images for which you want to order prints
onto another xD-Picture Card and then specify the
DPOF settings.
CAN NOT SET DPOF
r CAN NOT SET DPOF
An attempt was made to specify DPOF settings for
an image that is not supported by DPOF. DPOF printing cannot be used with this image
format.
COMMUNICATION
ERROR
The camera is not connected to a PC or printer. • Check that the USB cable (mini-B) is connected
correctly.
• Check that your printer is turned on.
PRINTER ERROR
Displayed for PictBridge. • Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
PRINTER ERROR
RESUME?
Displayed for PictBridge. Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Warning Displayed Explanation Remedy
Continued