Furuno FM-8700 - Manual (Page 3)

SAFETY INSTRUCTIONS
Do not open the cover
unless totally familiar with
electrical circuits.
Hazardous voltage which will
cause death or serious injury
exists inside the equipment.
WARNING
Turn off the power at the mains switch-
board before beginning the installation.
Post a warning sign near the switch-
board to indicate that power should not
be applied while the equipment is being
installed.
Electrical shock, serious injury or fire can
result if the power is not turned off or is
applied while the equipment is being
installed.
Ground the equipment to
prevent electrical shock
and mutual interference.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage.
The voltage rating appears on the label
at the rear of the display unit.
Observe the compass safe disatnce to
prevent deviation of a magnetic
compass.
CAUTION
Standard
compass
1.6 m
0.85 m
0.9 m
1.2 m
0.65 m
0.7 m
Transceiver
Unit
Duplexer
Unit
Power Supply
(option)
Steering
compass