Faria Instruments J1939 - Manual (Page 20)

Page 16 Page 17
Press and hold the “Up” and “Down” buttons for 2 seconds
to enter the “Select Fuel Tank Size” function.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Press and hold the “Up” and “Down” buttons for 2 seconds
to select “Standard Fuel Tank Size”.
1
Select
Standard
Fuel Tank
Size
2
3
4
Review the list of standard fuel tank sizes for a size that
matches the fuel tank in the application.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2
seconds to save the selection and return to “Select Fuel
Tank Size”.
1 Select
Fuel Tank
Size
150 GAL
> 0 GAL
25 GAL
36 GAL
40 GAL
50 GAL
55 GAL
80 GAL
120 GAL
2
3
4
5
6
These selections will appear during scrolling. Only three
selections are shown at one time.
NOTE: “0 GAL” is the default from the factory.
If there is no tank size available in the list that matches
your tank size, press the “Mode” button to return to “Select
Standard Fuel Tank Size” screen. Then press the “Down”
button to switch to “Other Fuel Tank Size”.
Press and hold the “Up” and “Down” buttons for 2 seconds
to select “Other Fuel Tank Size”.
1
Select
Other
Fuel Tank
Size
2
3
4
Press “Up” or “Down” to set the fuel tank size displayed
on the screen to match your fuel tank size in GAL. The line
4 value will adjust. The maximum setting is 999 Gallons.
To set, Press and hold the “Up” and “Down” buttons for
2 seconds to save the selection and return to “Select Fuel
Tank Size”.
1 Select
Other
Fuel Tank
XXX
2
3
4
Press “Mode” to return to “Edit” mode.