Faria Instruments J1939 - Manual (Page 13)

Page 10
Instructions – Function Line Display
Select Default Screen
1 Select
Default
Screen 2
3
Press and hold the “Up” and “Down” buttons for 2 seconds
to enter the “Select Default Screen” function.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
(Display Screen 1 is the “Default” at first turn on)
1
Default
Display
Screen:
1
2
3
4
Press and hold the “Up” and “Down” buttons for 2 seconds
to select screen 1 as the “Default Screen” and exit back to
“Edit” mode.
Press “Up” or “Down” to select another screen.
1
Default
Display
Screen:
X
2
3
4
Press and hold the “Up” and “Down” buttons for 2 seconds
to select this screen as the “Default Screen” and exit back
to “Edit” mode. Press “Up” or “Down” to select another
screen
Repeat until desired “Default Screen” is selected.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Reset Fuel Used
1 Reset
Fuel
Used
2
3
Press and hold the “Up” and “Down” buttons for 2 seconds
to reset the “Fuel Used” to zero (0).
Confirms the Fuel Used is reset to zero with a beep and
“Done” displayed in the LCD. Press the “Mode” button
to return to “Edit” mode.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode
2 Done