Faria Instruments J1939 - Manual (Page 18)

Page 15
Press and hold the “Up” and “Down” buttons for 2 seconds
to select “Boost Pressure Dial”.
Press “Up” or “Down” to select another Dial.
Press “Mode” to return to “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2 seconds
to save the selection and return to select another Dial.
1 Select
Boost Press
Dial
0-70 PSI
> 0-30 PSI
0-50 PSI
2
3
4
5
6
Select Fuel Sender
1 Select
Fuel
Sender
2
3
Press and hold the “Up” and “Down” buttons for 2 seconds
to enter the “Select Fuel Sender” function.
Press “Up” or “Down” to select another function.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2 seconds
to save the selection and return to “Edit” mode.
1
Select
Fuel
Sender
EU 10-180
> NO SENDER
USA 240-33
2
3
4
5
6
NOTE: The fuel sender MUST be connected before the
selection can be made.
Select Display Units
1
Select
Display
Units
2
3
Press and hold the “Up” and “Down” buttons for 2 seconds
to enter the “Select Display Units” function.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Select Pressure Units
1
Select
Pressure
Units
2
3